As you are aware, neither an EDL USB cord nor any EDL commands will allow your Xiaomi Redmi Y2 to enter EDL Mode. So, the obvious question is: how do you boot into or enter edit mode on the Xiaomi Redmi Y2?
If you're seeking an answer to this query, too? You are now on the appropriate page. I'll explain how to use test points to boot your Xiaomi Y2 into EDL mode right here on this website.
To do this, we first locate the proper edl test points on the motherboard of the intended phone. If the edl test points we used were the right ones, we would connect those two points and be done. At this point, your device would be recognized by your computer.
You may quickly flash the software for your Mi phone and deactivate your Mi account after your computer has identified your device.
Describe EDL Mode:
Emergency Download Option is the full name of this mode. When your device is in a boot loop, hard bricked, or dead-boot, you can utilize this mode to install Android OS (Stock ROM) from a PC to an EMMC via the CPU. Only Qualcomm Snapdragon Android devices may use the EDL mode.
Using Test Points, start your Xiaomi Redmi Y2 in EDL mode. View the screenshot.
The screenshot includes information on the Xiaomi Redmi Y2 EDL test points. To locate the proper EDL test points on your Mi Y2 motherboard, look at the screenshot below.
To locate the right edl locations on your Xiaomi Redmi Y2 motherboard, carefully examine the above screenshot.
Important Reminder:
Only educational and informative goals are served by this lesson.
Although this procedure has been tried and is correct, we disclaim all liability for any harm this procedure may cause. Thus, proceed at your peril.